Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages
+968 94673254

Vacuum regulators - RVTM3

The vacuum regulator is used to measure and adjust the vacuum level within the context of medical suction. It enables to drain substances out of the patient’s body during surgical procedures. The vacuum regulator should be connected to a vacuum source on the wall either using a direct probe or a rail mounting system. It should be associated with a collection jar and a suction hose.

SPECIFTICATIONS:
Continuous vacuum regulator.
Compact, strong and ergonomic device.
Manual adjustment of the vacuum gauge from -45° to +45° for a better visibility.
Vacuum gauge protected by a plastic housing.
ON/OFF switch-button providing a quick restoration of the pre-adjusted vacuum level.
Central regulation knob with a free rotation at the end of the course (impossible blocking).
Quick adjustment: 2.5 turns are enough to reach the maximum vacuum level.
Comfort of use: the needle of the vacuum gauge follows the motion of the control knob, either to increase or to decrease the vacuum level.
Supplied as a standard with a 100 ml safety jar equipped with a mechanical anti-overflow safety valve and a single-use antibacterial plastic filter up-front. Made of polycarbonate, autoclavable up to 134°C and unbreakable, this safety jar does not require any sterilization except in case of accidental liquids’ overflow or perforated filter. Money and time savings are guaranteed!
Fixing of the safety jar by an easy-click rotation.
Rotation of the safety jar to avoid any pinch of the tubing.
3 in 1 system (patented)
Device with a metal outlet tubing nipple integrated in the body of the regulator: for a better safety, emergency suctions can even be processed if running out of stock of filters or safety jars.
Easy & safe maintenance.
Quick and easy replacement of the vacuum gauge.
A unit serial number is laser engraved on the body of each vacuum regulator ensuring its identification and traceability.
8 digits number indicating the manufacturing year and month as well as the unit serial number.

AVAILABLE VESIONS:
Available vacuum levels:
0-250 mbar/hPa,
0-600 mbar/hPa, 0-400 mmHg,
0-1000 mbar/hPa, 0-760 mmHg.
Configurations: single and twin.
Colors: yellow and grey
Standards: AFNOR (French standard), BS (British standard), DIN (German standard), US OHMEDA (American standard), UNI (Italian standard), NORDIC (Scandinavian standard), CARBUROS METALICOS (Spanish standard), DISS (American standard), Czech standard and Korean/Japanese standard. Contact us for other standard.

RVTM3 Digital

RVTM3 Digital

RVTM3 Catalogue

RVTM3 Catalogue

TM-CE

TM-CE

Suction Trolleys

The suction kits and trolleys enable to group on a mobile holder (either to carry or to push) the various products making up a suction set (suction devices, collection jars, catheter holder …)

SPECIFTICATIONS:
Chrome-plated mobile holder with a square-shaped column mounted on a 5 branch basis with 5 rotating wheels (including 2 wheels with brakes).
Dimensions: height 1140 mm x width 500 mm x depth 500 mm.
Accessories:
– Suction device
– Connection to the central vacuum source
– Collection jars
– Silicone hose
– Vacuum stop
– Catheter holder

AVAILABLE VESIONS:
Standards: AFNOR (French standard), BS (British standard), DIN (German standard), US OHMEDA (American standard), NORDIC (Scandinavian standard). Contact us for other standard.
Various configurations can be made on demand. Do not hesitate to contact us for any specific request.

Catalogue RVTM3 Trolly

Catalogue-RVTM3 Trolly

VENTURI TM2 ejectors

The VENTURI TM2 ejector is used to create, to adjust and to measure a suction from a source of pressured gas on the wall or from a cylinder (oxygen or medical air). It enables to suck in liquids or mucus in the absence of vacuum pipeline network. The VENTURI TM2 ejector should be connected either to a source of pressured gas on the wall, using a direct probe or a rail mounting system, or a cylinder through a pressure regulator fitted with a quick-release connector. The VENTURI TM2 ejector should be associated with a collection jar and a suction hose.

SPECIFTICATIONS:
Suction flowrate : 40 l/min at 800 mbar
Maximum vacuum: 800 mbar ± 50 mbar
Limited gas consumption : 60 l/min at 800 mbar
Vacuum gauge protected by a plastic housing. Easy cleaning.
Anodized aluminium body ensuring a great robustness.
Silencer: high performance.

Supplied in standard with a 100 ml safety jar with plastic front filter to protect the device against any liquids’ overflow.

3 in 1 system (patented). Device with a metal outlet tubing nipple integrated in the body of the VENTURI TM2: for a better safety, emergency suctions can even be processed if running out of stock of filters or safety jars.

A unit serial number is engraved on the body of each device ensuring its identification and traceability. 8 digits number indicating the manufacturing year and month as well as the unit serial number of the device.

AVAILABLE VESIONS:
Gases: O2, medical Air.
Model with safety jar (100 ml with plastic front filter, 150 ml or 500 ml with paper filter in the cover) or with outlet tubing nipple (tubing nipple integrated or outlet tubing nipple threads).
Standards: AFNOR (French standard), BS (British standard), DIN (German standard), US OHMEDA (American standard), UNI (Italian standard), NORDIC (Scandinavian standard), CARBUROS METALICOS (Spanish standard), DISS (American standard), Czech standard and Korean/Japanese standard. Contact us for other standard.

Catalogue VENTURI

Catalogue VENTURI

Collection jars

The collection jars and suction liners are used to collect liquids or mucus resulting from medical suction. They can be used in conjunction with any suction device.

SPECIFTICATIONS:
Collection jars made of polysulfone, unbreakable and autoclavable up to 134° C.
Collection jars made of polycarbonate, unbreakable and autoclavable up to 121° C.
Covers fitted with inlet nipples marked PATIENT/VACUUM.
Covers fitted with an anti-overflow safety system.
For 1 L short and 2 L jars: integrated moulded hanger which enables to hang the jar directly onto the rail clamp or onto the wall bracket without using a basket.

AVAILABLE VESIONS:
Collection jars made of polysulfone and polycarbonate:
• 1 L long with screw-fit plastic lid (available in polysulfone only)
• 1 L short with pressure-fit lid with silicone ring – with moulded hanger
• 2 L with pressure-fit lid with silicone ring – with moulded hanger
• 2 L with pressure-fit plastic lid – with moulded hanger
• 2 L with screw-fit metal lid – with moulded hanger
• 4 L with pressure-fit plastic lid

Catalogue Jars

Catalogue Jars