Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages
+968 94673254

Pressure regulators - REGSON TM2

The REGSON 2 pressure regulator, connected to an Oxygen or medical Air cylinder, is used to regulate the gas pressure by supplying the operating outlet with a controlled and stable pressure below its supply pressure. The pressure of the compressed gas cylinder can be read on the pressure gauge of the device. Combined with a DEBSON 2 flowmeter with pre-adjusted flowrates, the REGSON 2 pressure regulator enables to adjust and measure the flow of a gas that is to be delivered to patients through the respiratory tract from a gas cylinder. Fitted with a quick-release connector it also enables to supply a ventilator or any other medical device with gas. Two connection systems to the gas cylinder are available: bullnose fitting: for large cylinders (> 4 litres in water or 0.8 m3), yoke pin-index fitting: universal system for small cylinders (< 4 litres in water or 0.8 m3).

SPECIFTICATIONS:
Supply pressure: 200 bar
Outlet pressure: 4.5 bar
Piston type pressure regulator for a great reliability.
Single stage pressure regulator.
Integrated relief valve protected by the body of the pressure regulator thus ensuring its inviolability and its reliability.
Pressure gauge protected against shocks thanks to a plastic bumper.
Filter at the inlet to prevent the risks linked to high pressure.
It can be used in any orientation for a perfect adaptation to the medical needs especially for emergency.
Flow control knob equipped with a ratchet mechanism avoiding accidental flowrate change.
Presence of a gas flow between two positions ensuring the gas supply for the patient even if the device is accidentally positioned between two settings.
Control knob with large wings facilitating the grip and including a twin display of the selected flowrate.
Control knob with a wide transparent window to be able to read the selected flowrate as well as the previous and the next ones.
Rotating direction: counterclockwise.
Supplied in standard with a Stop system preventing the medical staff from switching from 0 to maximum flow and conversely.
Unit serial number engraved on the body of each pressure regulator ensuring its identification and traceability.
Device to be serviced every 5 years.

AVAILABLE VESIONS:
Gases: O2, (Also available in medical Air for AFNOR, DIN and NORDIC standards)
Flowrates:
1 l/min (paediatric) – 5 l/min – 15 l/min – 25 l/min – 50 l/min
With or without quick-release connector
With or without Stop system
With or without VENTURI TM ejector (OXAP)
Connection systems and standards:
– Bullnose fitting: AFNOR (French standard), BS (British standard), DIN (German standard), US OHMEDA (American standard), UNI (Italian standard), NORDIC (Scandinavian standard). Contact us for other standard.
– Yoke pin-index fitting: universal system

TM CE

TM CE

TM Catalogue REGFLOW

TM Catalogue REGFLOW