Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages
+968 94673254

Pressure regulators - DETREG TM

The DETREG pressure regulator, connected to an Oxygen or medical Air cylinder, is used to regulate the gas pressure by supplying the operating outlet with a controlled and stable pressure below its supply pressure. The pressure of the compressed gas cylinder can be read on the pressure gauge of the device. Only equipped with a quick-release connector, it enables to supply a ventilator or any other medical device with gas. Two connection systems to the gas cylinder are available: – bullnose fitting: for large cylinders (> 4 litres in water or 0.8 m3) – yoke pin-index fitting: universal system for small cylinders (< 4 litres in water or 0.8 m3).

Supply pressure: 200 bar
Outlet pressure: 4.5 bar
Piston type pressure regulator for a great reliability.
Single stage pressure regulator.
Integrated relief valve protected by the body of the pressure regulator thus ensuring its inviolability and its reliability.
Pressure gauge protected against shocks thanks to a plastic bumper.
Filter at the inlet to prevent the risks linked to high pressure.
Unit serial number engraved on the body of each pressure regulator ensuring its identification and traceability.
Device to be serviced every 5 years.

Gases: O2, medical Air, N2O
Connection systems and standards:
– Bullnose fitting:
O2: AFNOR (French standard), BS (British standard), DIN (German standard)
Medical Air: AFNOR (French standard), DIN (German standard)
N2O: AFNOR (French standard)
Contact us for other standard.
– Yoke pin-index fitting (O2 only): universal system